Nowadays, the use of bathtubs is very popular. Bathtubs can appear in the bathrooms of many families. In the modern fast-paced, high-stress life, the way to relieve fatigue and relax is to take a hot bath in the bathtub. Yes, the bath did give us infinite comfort. But once the bathtub is dirty, how to wash it? How to maintain it so that the bathtub is as clean as new?
How to maintain the bathtub
General liquid detergents and soft cloths can be used for daily cleaning of bathtubs, and ketones or chlorinated water components should not be cleaned. When disinfecting, it is forbidden to use disinfectants containing formic acid and formaldehyde;
If there are scratches or cigarette burns on the surface of the bathtub, just sand with 2000# water sandpaper, then apply toothpaste, and sand with a soft cloth to smooth as new;
Scale on the surface of the bathtub can be wiped with a soft towel dipped in lemon juice, vinegar and other lightly acidic detergents;
The surface of the cylinder is dirty, you can wipe it with a wet towel dipped in neutral detergent, this process can be repeated three times, it can be smooth as new;
Do not hit the surface of the bathtub with hard objects and knives, and do not let cigarette butts or exceed 70%. ° The heat source is in contact with the surface of the bathtub;
Do not use rough surfaces containing chemical solvents or particles to clean the surface of the cylinder;
If there is a hair and other debris blockage, the returner and nozzle can be unscrewed for cleaning;
Can not use more than 80 degrees of hot water, if repeated use of hot water, can shorten the service life of the cylinder, the correct way is to put cold water first and then put hot water;
Do not start the pump when there is no water in the bath;
During the hydromassage process, attention should be paid to avoid debris or other items blocking the water outlet, causing excessive pump load, causing the pump to overheat and burn the pump.
What to do with a bathtub crack?
The causes of bathtub cracks are divided into cold cracks, hot explosion cracks, impact cracks, but no matter what the reason, the repair methods of their cracks are the same;
If the crack is serious, it is recommended to ask a professional to repair it; For small cracks, you can use the adhesive of the corresponding bathtub material to bond, of course, choose an adhesive that is non-toxic and harmless to the human body;
Clean the bathtub, dry it and use the adhesive, and after it is dry, it can be tested to see if there is water leakage, and if it does not leak, it can be put into normal use.
Post time: Jul-15-2023