For householders who enjoy life, bathtubs are an indispensable standard in bathrooms. The bathtub is not only the effect of bathing, but also brings excellent soothing effect, massage, relieve tiredness, repair the body and mind… So do you know the installation skills of acrylic bathtubs? Don’t think that this is all the work of the device master, be prepared to make your bath not be embellished!
1. The acrylic bathtub should be installed before the drainage fittings should be installed, and the water should be filled to test whether there can be leakage.
2. Before installing the bathtub with iron bracket, check whether the bathtub can be flat in the air.
3. After putting the bathtub in the center of the reservation, you should use the degree ruler and adjust the support foot nut until the bathtub level.
4. The edge of the bathtub and the wall should be insisted on a gap of 3-5mm.
5. The bathtub should be used against the wall such as soft polyethylene or similar materials as buffer data, and the lower edge of the tile and the surface of the bathtub should leave a gap of at least 5mm.
6. There should be a gap of about 20mm between the lower edge of the skirt bathtub and the aerial decoration data, and the gap should be sealed with buffer data and sealing materials.
7. The drainage fittings are inserted into the air drainage pipe locally above 50mm, and the connection should be tight to avoid water leakage.
8. The jacuzzi must be equipped with grounding wire and leakage maintenance switch.
9. Leave manholes as close to the bathtub drainage as possible.
10. During the bathtub installation and house decoration, please cover the appearance of the bathtub with soft materials to avoid scratches.
11. Do not use cement mortar on the back side of the bathtub to fill it, it may cause damage.
12. Do not use hard objects to hit the bathtub during the installation process.
13. Do not stand on the bathtub for construction, or place heavy objects on the edge of the bathtub, which may cause damage.
14. After the bathtub is installed, it takes 24 hours before it can be used.
Post time: Jul-14-2023